For almost one month everything was correct, and suddenly, I don't know why I saw this :
| CODE |
| > "make.exe" program avrdude -p atmega16 -P /dev/ttyUSB0 -c USBasp -U flash:w:diody.hex found 5 busses avrdude: error: programm enable: target doesn't answer. 1 avrdude: initialization failed, rc=-1 Double check connections and try again, or use -F to override this check. avrdude done. Thank you. make.exe: *** [program] Error 1 > Process Exit Code: 2 > Time Taken: 00:01 |
Do you maybe know why it happen ?
I programm in C, I use USB in programming, ATMega16 with WinAVR20071221..
I really don't know.. every supposing expected!
//sorry for mistakes in english :)