PonyProg serial device programmer
Introduction
If you are looking for a simple but powerful programmer you are right, it's here.
PonyProg is a serial device programmer software with a user friendly GUI framework available for Windows95/98/ME/NT/2000/XP and Intel Linux. Its purpose is reading and writing every serial device. At the moment it supports I²C Bus, Microwire, SPI eeprom, the Atmel AVR and Microchip PIC micro.
SI-Prog is the programmer hardware interface for PonyProg.
With PonyProg and SI-Prog you can program Wafercard for SAT, eeprom within GSM, TV or CAR-RADIO. Furthermore it can be used as a low cost starter kit for PIC and AVR.
Buy SI-Prog NOW!!! Look at SI-Prog page for price and delivery details
PonyProg works also with other simple hardware interfaces like AVR ISP (STK200/300), JDM/Ludipipo, EasyI2C and DT-006 AVR (by Dontronics).
Features
Support 24C01, 24C02, 24C04, 24C08, 24C16 I²C Bus EEPROM
Support 24C32, 24C64, 24C65, 24C128, 24C256, 24C512 I²C Bus EEPROM
Auto detect 24XX EEPROM capacity
Support 24C325 and 24C645 I²C Bus EEPROM
Support Siemens SDE2516, SDE2526, SDA2546, SDA2586, SDA3546, SDA3586 EEPROM (as 24XX Auto)
Support AT17C65, AT17C128, AT17C256, AT17C512, AT17C010 I²C Bus EEPROM
Support Siemens SDE2506 EEPROM
Detect the bank roll over capability of some old 24XX EEPROM
Support AT90S1200, AT90S2313, AT90S2323, AT90S2343, AT90S4414, AT90S4434, AT90S8515, AT90S8535 Flash micro
Support AT90S2323, AT90S2343, AT90S2333, AT90S4433, AT90S4434, AT90S8535, AT90S8534
Auto detect AVR microcontroller type
Support the AVR microcontroller ATmega103, ATmega161, ATmega163, ATmega 323, ATmega128, ATmega8
Support the AVR microcontroller ATmega16, ATmega64 (untested)
Support the AVR microcontroller ATmega32, ATmega162, ATmega 169, ATmega8515, ATmega8535 (untested)
Support the AVR ATtiny microcontroller ATtiny12, ATtiny15
Read ATtiny12 and ATtiny15 Oscillator Calibration Byte
Write lock bits to protect the AVR micro from reading
Write both the Flash and EEPROM memory of the AVR micro at once
Support the AT89S8252 and AT89S53 micro
Support 93C06, 93C46, 93C56, 93C57, 93C66, 93C76, 93C86 Microwire EEPROM (C and LC series, the CS serie is not supported yet)
Support 93C13 (as a 93C06) and 93C14 (as a 93C46) Microwire EEPROM
Access microwire eeproms in either 8 and 16 bit organization
Improved support PIC 16C84/16F84 micro
Support PIC 16F873/874/876/877 and PIC 16F84A micro
Support PIC 16F873A/874A/876A/877A and PIC 16F627/628 micro (untested)
Support PIC 12C508/509 micro
Support PIC 12C671/672 micro (untested)
Support 25010, 25020, 25040 SPI EEPROM
Support 25080, 25160, 25320, 25640, 25128, 25256 Big SPI EEPROM
Support 25642 and 95640 Big SPI EEPROM
Support NVM3060 eeprom
Support MDA2061/MDA2062 eeprom
Support X2444/X2445 eeprom
Support S24H30 (untested)
Read/Write Intel hex format file as well as raw binary file
Read/Write Motorola S-record format file
Read/Write CSM format file
Features a custom E²P format file to store the EEPROM characteristics, an editable comment and memory content all together with CRC
Enhanced buffer edit, text and hexadecimal
Work with Windows95/98/ME and WindowsNT/2000/XP and Linux*
Reload file button
Fill buffer command
Security bits editing for AVR, AT89S and PIC
Serial number programming
Script files for batch programming
Improved speed with WinNT/2000/XP with a driver for direct I/O.
*Not all interfaces are supported in every operating system, for more informations look at the documentation.
Link to Download Site: http://www.lancos.com/prog.html
Introduction
If you are looking for a simple but powerful programmer you are right, it's here.
PonyProg is a serial device programmer software with a user friendly GUI framework available for Windows95/98/ME/NT/2000/XP and Intel Linux. Its purpose is reading and writing every serial device. At the moment it supports I²C Bus, Microwire, SPI eeprom, the Atmel AVR and Microchip PIC micro.
SI-Prog is the programmer hardware interface for PonyProg.
With PonyProg and SI-Prog you can program Wafercard for SAT, eeprom within GSM, TV or CAR-RADIO. Furthermore it can be used as a low cost starter kit for PIC and AVR.
Buy SI-Prog NOW!!! Look at SI-Prog page for price and delivery details
PonyProg works also with other simple hardware interfaces like AVR ISP (STK200/300), JDM/Ludipipo, EasyI2C and DT-006 AVR (by Dontronics).
Features
Support 24C01, 24C02, 24C04, 24C08, 24C16 I²C Bus EEPROM
Support 24C32, 24C64, 24C65, 24C128, 24C256, 24C512 I²C Bus EEPROM
Auto detect 24XX EEPROM capacity
Support 24C325 and 24C645 I²C Bus EEPROM
Support Siemens SDE2516, SDE2526, SDA2546, SDA2586, SDA3546, SDA3586 EEPROM (as 24XX Auto)
Support AT17C65, AT17C128, AT17C256, AT17C512, AT17C010 I²C Bus EEPROM
Support Siemens SDE2506 EEPROM
Detect the bank roll over capability of some old 24XX EEPROM
Support AT90S1200, AT90S2313, AT90S2323, AT90S2343, AT90S4414, AT90S4434, AT90S8515, AT90S8535 Flash micro
Support AT90S2323, AT90S2343, AT90S2333, AT90S4433, AT90S4434, AT90S8535, AT90S8534
Auto detect AVR microcontroller type
Support the AVR microcontroller ATmega103, ATmega161, ATmega163, ATmega 323, ATmega128, ATmega8
Support the AVR microcontroller ATmega16, ATmega64 (untested)
Support the AVR microcontroller ATmega32, ATmega162, ATmega 169, ATmega8515, ATmega8535 (untested)
Support the AVR ATtiny microcontroller ATtiny12, ATtiny15
Read ATtiny12 and ATtiny15 Oscillator Calibration Byte
Write lock bits to protect the AVR micro from reading
Write both the Flash and EEPROM memory of the AVR micro at once
Support the AT89S8252 and AT89S53 micro
Support 93C06, 93C46, 93C56, 93C57, 93C66, 93C76, 93C86 Microwire EEPROM (C and LC series, the CS serie is not supported yet)
Support 93C13 (as a 93C06) and 93C14 (as a 93C46) Microwire EEPROM
Access microwire eeproms in either 8 and 16 bit organization
Improved support PIC 16C84/16F84 micro
Support PIC 16F873/874/876/877 and PIC 16F84A micro
Support PIC 16F873A/874A/876A/877A and PIC 16F627/628 micro (untested)
Support PIC 12C508/509 micro
Support PIC 12C671/672 micro (untested)
Support 25010, 25020, 25040 SPI EEPROM
Support 25080, 25160, 25320, 25640, 25128, 25256 Big SPI EEPROM
Support 25642 and 95640 Big SPI EEPROM
Support NVM3060 eeprom
Support MDA2061/MDA2062 eeprom
Support X2444/X2445 eeprom
Support S24H30 (untested)
Read/Write Intel hex format file as well as raw binary file
Read/Write Motorola S-record format file
Read/Write CSM format file
Features a custom E²P format file to store the EEPROM characteristics, an editable comment and memory content all together with CRC
Enhanced buffer edit, text and hexadecimal
Work with Windows95/98/ME and WindowsNT/2000/XP and Linux*
Reload file button
Fill buffer command
Security bits editing for AVR, AT89S and PIC
Serial number programming
Script files for batch programming
Improved speed with WinNT/2000/XP with a driver for direct I/O.
*Not all interfaces are supported in every operating system, for more informations look at the documentation.
Link to Download Site: http://www.lancos.com/prog.html